1995 Okamoto 12-24 DX Surface Grinder

Up for sale is this 1995 Okamoto ACC-1224 DX automatic surface grinder. This machine has a capacity of 12″ X 24″ and uses a 12″ diameter grinding wheel. This machine can be wired for either 208V, 230V or 460V three phase power (currently wired for 208V). This has an optional Heidenhain dual axis DRO as well as a hydraulic overhead wheel dresser. This is equipped with a filter paper type coolant tank and includes an additional grinding wheel and hub. The electromagnetic chuck is a Walker 12″ X 24″ LBP fine pole unit. This grinder is in good functioning condition and is ready to use. The spindle is whisper quiet. This came out of a shop which closed its doors but was being used regularly up until that point. This machine has had its 30 gallons of hydraulic oil/way lube drained so that will need to be replaced before use.

Also included are the cast iron machine feet/pads, operation manual with original inspection report, and the original tool box with wheel wrenches and other misc. pieces.

Price: $19,750

1976 English/Metric Hardinge HLV-H

Up for sale is this Hardinge HLV-H Super Precision Tool Room Lathe. This is a good, tight, & original machine and has never been repainted or abused. This machine was purchased new by IBM in Austin, TX and was then sold to a company in Florida in 1991. It sat unused from 1991 up until I purchased it. This is a 1976 machine that has many late model features such as a tapered Hardinge spindle, wide bed plate with teflon lined carriage, ball bearing carriage rack gear and more. This machine is 208V 3 Phase power. At some point this machine had an Anilam DRO on it and all that is left now is the scales. I do not have a way to test if these scales are still working. The graduated dials on this machine are in metric units. I have done an initial cleaning and some general maintenance to the lathe which includes…

-Replaced both motor and spindle drive belts with new
-Flushed fluid in apron-Replaced both bearings in AC electric motor
-Replaced both bearings in drive unit counter-shaft
-Replaced O-rings in oiling system
-Removed, cleaned, & adjusted cross slide
-Greased gear box

This machine is in good mechanical condition and is ready to be used right away. The bed plate on this lathe is in excellent condition. I have ran and tested the lathe for several hours without issue. All the power feeds function as they should and the gearbox works as it should. The oiling lubrication system functions as it should as well. The drive unit is now very smooth in all RPM ranges. This lathe comes with the pictured tooling, including 2 trays of 5C collets. There is a complete set of metric change gears for all metric threading pitches. Nearly every collet is Hardinge brand and many of them have never been used. This machine is powered up and available for inspection. 

Price: $14,500

Engis 15LC Lapping Machine

Up for sale is this very nice Engis 15″ bench top lapping machine. This is a model 15LC that is powered by 115V single phase power. As you can see this unit has the optional variable speed motor drive as well as a digital timer and optional slurry pump. This has a cast iron lapping plate as well as 3 conditioning rings with hand weights. This unit is in good condition and operates as it should. This unit is clean and was not used hard throughout its life. Please see the last picture for a listing of the specifications from Engis.

To purchase this machine new from Engis would cost $8000+ not including the upgrade options that this machine has! According to Engis this very machine was the last 15LC to leave their factory before they released the FL-15 series.

I will palatalize and ship this machine freight, please ask for a quote. Local pick-up is available as well. The lapping machine is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Payment to be made by cash, check or wire transfer.

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 450 pounds and shipping dimensions are roughly 48″ X 40″ X 30″. Forklift is on-site and can load this onto a truck or trailer.

Price: $4200

1964 Monarch 10EE Lathe

Up for sale is this 1964 Monarch 10EE tool room lathe. It is the 20″ between centers model and it has the electronic lead screw reverse function (ELSR). This was originally a module drive machine but it has been converted at some point in its life. The original 5HP General Electric DC motor and original back gear assembly is still in use and has not been removed. The previous owner has installed a Hampton Products Co. solid state DC converter in the machine. I do not know anything about this drive but it does appear this company is still in business. I am able to power this machine up and get the spindle running. The ELSR functions exactly like it is supposed to. The speed change is done with a potentiometer near the coolant on/off switch. I can not get the machine to go over 1000 RPM the way it is set up but it does move into forward and reverse with the lever just as I would expect it to do. I could not get the coolant pump contactor to engage with the switch. I have not tried to troubleshoot these two issues. The spindle sounds nice and smooth and the back gear works as it should. The back gear is louder in forward than it is in reverse which seems normal to me. All the power feeds work as expected and the gearbox shifts into all positions like expected. The half nuts operate like expected and the carriage moves fine when they are engaged. The machine is running in many of the photos. This is 230V 3 phase powered.

I have cleaned this machine up a bit and topped it off with oil but it is being sold as-is like it sits. This would make a great project for anyone who is looking to own one of these great American lathes. I have a forklift and can load this onto a truck or trailer. I could make a skid for this machine for a fee. Local pick up is preferred and payment is to be made by cash or a bank check. This machine is powered and available for test in New Berlin, WI. Machine is FOB New Berlin, WI. Thank you for looking.

1993 Bridgeport Series I Knee Mill

Up for sale is this 1993 Bridgeport knee mill. This is a 2HP Series 1 that has the 2J variable speed head with an RPM range of 60-4200. This has the large 9″ X 48″ table as well as chrome ways on the Y axis. It is equipped with a 2 axis Anilam DRO, Bridgeport 8F power feed for the X axis, and a Kurt air operated power drawbar. This has a Bijur manual lubrication pump for way lubrication and an adjustable work lamp.

This machine appears to be in good condition and seems to have been taken care of during its life. I have powered it up and everything seems to function as it should. The table is in good condition and the original flaking is still visible. The power feed on the table works as well as the power feed in the head. There were no abnormal noises in the spindle or drive train as I ran it through the spindle speeds. The back gear works great as well.

This machine is powered up and local inspection is encouraged.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Machine can be crated and shipped internationally for a fee. Payment to be made by cash, check or wire transfer

I will help in any way I can to assist in transportation of this machine.

2003 Okamoto Linear 6-18 Surface Grinder

Up for sale is this 2003 Okamoto Linear 6-18B 6″ X 18″ surface grinder. This is in nearly unused condition and has to be seen to be believed. This came from a technical college that closed its shop program. The spindle is whisper quiet on this machine and the paint is in amazing condition. This still retains all the original hand scraping on the dual V ways of the saddle. This is a dual voltage machine and can be set up on 230V or 460V 3 phase (wired for 230V currently). This is equipped with a Kanetsu 6″ X 18″ magnetic chuck. In addition, this has the coolant package with additional guarding and coolant tank. Also included are the 4 cast iron leveling pads with threaded adjusters. To purchase new this machine would cost over $18,000!

L6-18B Base Grinder                                       $15,800
Coolant package with splash guard             $1,950
Kanetsu KMT-A chuck                                    $1,170


This machine is equipped with an automatic lubrication system so there is no need to pump a lube pump. This features a hand scraped dual V way saddle, double walled column construction and heavily ribbed Meehanite castings for added rigidity. This is a roller way table that is belt driven for extra smooth operation.

I will palletize and ship this machine freight, please ask for a quote. Local pick-up is available as well. The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Payment to be made by cash, check or wire transfer.

I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2200 pounds and shipping dimensions are roughly 70″ X 70″ X 70″. Forklift is on-site and can load this onto a truck or trailer.

Machine Features

• Construction Design— heavily ribbed Meehanite cast construction provides superior rigidity for vivration damping and optimum grinding accuracy. Designed for long-term, trouble-free performance.

• Extra-large Handwheels— conveniently located to optimize operator control, convenience and comfort. Zero-setting slip rings for vertical and cross feed hand wheels.

• Smooth Table Movement— moves easily through reliable belt drive table and linear ball bearing system. Cushioned table stops absorb impact when work piece limits are established.

• Centralized Controls – — for ease of operation, convenience and safety.

• Double-Walled Column Construction… Precision guideways provide the strength

• Precision Grinding Spindle—no-maintenance “ lubed for life” cartridge type grinding wheel spindle standard. Directly coupled to dynamically balanced, fan cooled motor. Universal taper on spindle nose allows for interchange of wheel adapters with other tool room grinders.

• Automatic Lubrication — All Linear B Models utilize a proven Automatic Lubrication System. Lubrication oil is pumped to an oil reservoir located in the column and all guideway surfaces and positioning screws.

Machine Specifications :

Capacity:

Maximum Longitudinal Travel 20.87 inch

Maximum Cross Travel 8.27 inch

Maximum Distance under Wheel (8.0” to Table Surface) 14.27 inch

Magnetic Chuck Size (WxL) 6 x 18 inch

Table:

Surface (Width x Length) 6.2 x 18.9 inch.

Hand Feed per Revolution 5.12inch

Crossfeed:

Crossfeed Per Revolution 0.100 inch

Handfeed Dial Graduation 0.001 inch

Wheelhead:

Downfeed Per Revolution 0.050 inch

Handfeed Dial Graduation 0.0001 inch

Grinding Wheel Size (DxWxB) 8.0 x 1.0 x 1.25 inch

Motors:

Grinding Wheel Spindle 2 hp

Power Supply: 230/460V, 3PH. 60HZ. 1.8 KVA

Desired Power Supply including

(Electro-Magnetic Chuck & Coolant System)

Floor Space ( L x W x H ) : 77 x 56 x 68 inch

Net Weight: 2,070 lbs.

1988 Mitsui MSG-250MH 8″ X 18″ Surface Grinder

Up for sale is this Mitsui 8″ X 18″ surface grinder. This is in nice condition and everything functions as it should. This still retains the original hand scraping on the dual V ways of the saddle. This surface grinder runs on either 208 or 230V 3 phase power. I have replaced all of the lubrication metering valves as well as cleaned and serviced the grinder. The table and saddle were removed and cleaned. The ball bearings in the table were removed, cleaned, and greased. The revolving handles, saddle rubber mats, and rubber coolant guard are new as well. This is equipped with a Walker 8″ X 18″ Ceramax fine pole magnetic chuck. This machine also has the optional 12″ grinding wheel package which includes a balancing wheel hub. This grinder is set up for coolant use and includes a coolant tank with pump. In addition, included are the 4 cast iron leveling pads with threaded adjusters. Mutsui is the best of the best and to purchase new this machine would cost over $30,000!

This machine is equipped with an automatic lubrication system so there is no need to pump a lube pump. This features a hand scraped dual V way saddle, double walled column construction and heavily ribbed Meehanite castings for added rigidity. This is a roller way table for extra smooth operation.

The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.
 
All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Payment to be made by cash, check or wire transfer.

Shipping weight is approx. 2500 pounds and shipping dimensions are roughly 60″ X 60″ X 80″. Forklift is on-site and can load this onto a truck or trailer.

2012 Haas ST-20 Turning Center

Up for sale is this late 2012 Haas ST-20 CNC turning center. This is a nice unit with only 4600 spindle hours. The options on the machine are spindle orientation, belt-type chip conveyor, and programable hydraulic tailstock. The standard features and specifications are listed below.

This lathe comes out of a state of the art, beautifully clean, brass foundry machine shop. Brass is what this lathe has machined its whole life. All machines in this shop are bank leased and every 7 years are traded in for new units without exception. This came off the shop floor in fully functional condition running parts until the minute it was disconnected. To purchase a new machine with these options from Haas is nearly $70,000!

This lathe has just received a full turret and wedge alignment service and is within all Haas factory specifications. The local Haas Factory Outlet has been out to inspect this machine and has noted zero issues.

This machine is powered up and available for inspection. 

Standard Features: 

• 8.3″ Hydraulic Chucking System 

• A2-6 Spindle Nose 

• 2.0″ Bar Capacity 

• 15″ Color LCD Monitor 

• Built-In USB Port 

• 1 MB Program Memory 

• Rigid Tapping 

• User-Friendly Haas Control 

• ISO Standard G-Code Programming 

Options 

• Programmable Hydraulic Tailstock 

• Belt-Type Chip Conveyor 

• Spindle Orientation

Specifications:

DATE OF MANUFACTURE                                             2012

SWING OVER FRONT APRON                                       31.8″

SWING OVER CROSS SLIDE                                          20.8″

MAX. CUTTING DIAMETER                                          15″

MAX CUTTING LENGTH                                                21″

BAR CAPACITY                                                                 2″

X AXIS TRAVEL                                                                9.3″

Z AXIS TRAVEL                                                                 21″

RAPID TRAVERSE ALL AXES                                       945 IPM

SPINDLE SPEEDS                                                              4000 RPM

SPINDLE NOSE                                                                   A2-6

SPINDLE BORE                                                                  3.5″

SPINDLE MOTOR                                                              20 HP

TURRET CAPACITY                                                         12 STATIONS

TAILSTOCK STROKE                                                       21″

TAILSTOCK TAPER                                                          MT #4

APPROX. DIMENSION                                                     165″ x 77″ x 81″

MACHINE WEIGHT                                                          9000 lbs (approx)

*SPECIFICATIONS SUBJECT TO VERIFICATION

2000 Bridgeport 2HP Milling Machine

Up for sale is this model year 2000 Bridgeport knee mill. This is a 2HP Series 1 that has the 2J variable speed head with an RPM range of 60-4200. This has the large 9″ X 48″ table as well as chrome ways on the Y axis. It is equipped with a 2 axis Acurite DRO with SENC 150 glass scales and a Bridgeport 8F power feed for the X axis. This has a Bijur manual lubrication pump for way lubrication and an adjustable work lamp.

This machine appears to be in good condition and seems to have been taken care of. I have powered it up and everything seems to function as it should. There are no marks or mishaps on the table and the original flaking is still visible. The power feed on the table works as well as the power feed in the head. There were no abnormal noises in the spindle or drivetrain as I ran it through the spindle speeds. The back gear works great as well. I do notice the table movements get tight at the extremes of travel which is common for these machines when the work is always in the center of travel. 

This machine is powered up and local inspection is encouraged. 

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is under power and available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer

I will help in any way I can to assist in transportation of this machine. Custom palletizing, stretch wrapping and preparation is $150.

2001 Mitsui MSG-200 MH Surface Grinder

Up for sale is this Mitsui 6″ X 12″ surface grinder (MSG-200MH). This is in nice condition and everything functions as it should. This still retains the original hand scraping on the dual V ways of the saddle. This is a 2001 machine that was installed new in early 2004. This came from a single shift injection mold shop. This surface grinder runs on either 208V or 230V 3 phase power. The grinder has a factory installed Sony LH51 single axis DRO with the high precision SR-128 glass scale on the Y axis. This is equipped with a Walker 6″ X 12″ LBP fine pole electromagnetic chuck with variable strength controller. In addition, included are the cast iron leveling pads with threaded adjusters. Mitsui is the best of the best and to purchase new this machine would cost over $25,000!

This machine is equipped with an automatic lubrication system so there is no need to pump a lube pump. This features a hand scraped dual V way saddle, double walled column construction and heavily ribbed Meehanite castings for added rigidity. This is a roller way table for extra smooth operation.

I will palletize and ship this machine freight, please ask for a quote. Local pick-up is available as well. The grinder is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Payment to be made by cash, check or wire transfer. I will help in any way I can to assist in transportation of this machine. Shipping weight is approx. 2000 pounds and shipping dimensions are roughly 70″ X 70″ X 70″. Forklift is on-site and can load this onto a truck or trailer.