Posted on

Goleta, CA HLV-H S/N 8446-T

*This machine is currently in the complete restoration phase, follow along as this machine is put back to work!*

This lathe was purchased from a lab in California with only a few photos to go by. It was purchased with power feed clutch problems but when the machine arrived it was much much worse. All the bad things that could happen to an HLV-H had happened to this lathe. Scored bed, peeling carriage teflon, plugged oil system, failed apron clutch discs, worn lead screw, and on and on.

This machine is getting a full rebuild including a new coat of factory original Sherwin Williams 7B Polane paint. It will look like new when finished!

 

Posted on

1971 Monarch 10EE Long Bed S/N 50544

Link to Video of Machine in Operation

Bought new in 1971 by General Electric, this rare long bed 10EE is in great condition. I have converted it from 460V to 240V and the machine runs very well now. This will run on single or three phase power.

Machine includes Aloris tool post, steady rest, follow rest, MT2 & MT3 spindle sleeves, Lexan chip shield, Drive Dog, 8″ 4 jaw chuck, Hardinge/Sjogren 22J collet chuck, 50+ 22J collets in round, square, & hex

As a preventive maintenance measure all the fluids have been changed. All three belts have been replaced and all 6 belt tension idler bearings have been replaced. The oiling system has been fully flushed and all oil metering units have been replaced with new. The cooling fan is new and the large tubes have been replaced with a matching pair.

This is a very smooth running & original machine.

SOLD

Posted on

Hardinge HLV-H S/N 10477T

Video Link Showing Operation of Machine

ID #: 10477
Brand: HARDINGE
Model: HLV-H 
Type: Precision Lathes
Condition: Used – Good
Year:
Serial #: HLV-H-10477-T
Location: Milwaukee, Wisconsin
United States
Return Policy: 30 days
Stock #: 10477

Hardinge HLV-H Precision Tool Room Lathe

This machine was purchased from a medical manufacturer’s tool room. It is in very nice condition and is ready to use. This is a late model lathe that has many desirable features such as a Newall DP900 DRO, hardened and ground cross slide way inserts, teflon carriage coating, 7″ wide flame hardened & ground lathe bed, Hardinge 4 degree taper lock spindle and much more. Machine includes a 6″ 3 jaw chuck. 

SPECS:

Swing: 11 “
Centers: 18 “
Threading: Yes
Power: 1.5 hp
RPM: 3000 rpm
Dimensions: 68″ x 30″ X 48″
Weight: 1800 lbs
  • -Infinitely Variable Spindle control 125-3000 RPM
  • -2 speed fully balanced ball bearing motor (208V)
  • -Independent electric variable power feeds (1/4″ – 7″ per minute)
  • -Super Precision preloaded ball bearing spindle
  • -1-1/16″ Collet capacity
  • -Fast lever collet chucking
  • -Hardened and ground cross slide inserts
  • –Hardinge 4 degree tapered spindle nose
  • -27 thread pitches standard in gearbox
  • -1-1/4″ through spindle capacity
  • -Automatic threading stops
  • -Lever actuated immediate leadscrew reversing
  • -Quick acting tool post slide for threading
Posted on

2001 Atlas / Clausing 6BVS40 5HP Bed Mill

SPECS

Table-W: 12 “
Table-L: 60 “
# Axes: 3
Travel-Long: 41 “
Travel-Cross: 20 “

Price: $6250 FOB Milwaukee, WI

Up for sale is this Atlas / Clausing 6BVS 5HP bed mill. This is a low hour machine that was bought new in 2001. This has not been used in the last 5 years and since new it has only machined graphite. Has power feeds, rapids and brake on all axis. The motor is variable speed from 55-3650 RPM and is inverter controlled from the operators panel. Has power downfeed on the Z axis. The spindle is a standard CAT 40 taper and included with the machine is a box of tool holders. Machine is coolant ready and has an auto lube system. Table is 60″ X 12″ and has a 2000 pound capacity. 

This machine has a Kurt power drawbar installed as well as an Acu-Rite DRO unit. This is a very nice unit that is $36,000 to buy new. Many of the original manuals and paperwork are included with the machine.
Machine is located at a local rigger so loading is available on site and freight could be arranged. Payment is to be made by certified check, company check or cash upon pick-up. Thanks for looking!

SOLD