Posted on

1989 Hardinge HLV-H Tool Room Lathe

Up for sale is this Hardinge HLV-H Super Precision Tool Room Lathe. This is in nice original condition and has never been repainted. This machine came to me in good condition but I have replaced all the oil metering units and have completely flushed the oiling system. I have given it a cleaning, adjusted the gibs as well as replaced both neoprene way wipers. This machine is equipped with a top of the line Heidenhain ND 780 DRO accurate to 0.0001″

This is a 1989 machine and it has many late model features such as hardened and ground cross slide ways, tapered Hardinge spindle, wide bed plate with teflon lined carriage, pre-drilled DRO mounting points, ball bearing carriage rack gear and more.

This machine left the factory as a 460V unit but at some point has been converted to a 230V machine by the addition of a step up transformer (mounted to back of lathe). I will convert this machine back to the factory 460V specification at no cost if the buyer desires.

Machine comes with pictured tooling (misc. 5C collets). In addition I have an aftermarket machine light as well as the lexan chip shield that will be included. Other accessories are available such as taper attachment, follow rest, steady rest, chucks, tool post, etc.

SPECIFICATIONS:
Spindle Capacity 5C Collets – Round……………………………..1-1/16″
Spindle Capacity 5C Collets – Hex……………………………………..7/8″
Step Chucks…………………………………………………………1-1/16″ – 6″
Variable Spindle Speeds…………………………………125 – 3000 RPM
Swing Over Bed……………………………………………………………….11″
Swing Over Cross Slide………………………………………………………6″
Swing Over Carriage…………………………………………………………..9″
Distance Between Centers…………………………………………………18″
Hole thru Spindle………………………………………………………….1-1/4″
Compound Slide Travel………………………………………………………3″
Carriage Power Feed Range……………………………….5/16″ – 7 IPM
Cross Slide Power Feed Range……………………………3/16″ – 4 IPM
Tailstock Spindle Travel…………………………………………………3-3/4″
Tailstock Spindle Taper…………………………………………….No. 2 MT
Lead Screw Diameter…………………………………………1″ – 8 Thread
Range of Threads in Gear Box……………………………………11 – 108
Number of Thread Changes in Gear Box……………………………..27
Electrics………………………………………………..460V/230V/3Ph/60Hz

*Preliminary Specifications Subject to Verification.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer

Posted on

1986 Hardinge HLV-H Tool Room Lathe

Up for sale is this Hardinge HLV-H Super Precision Tool Room Lathe. This is in exceptionally nice condition and has had very low use. This is all original and has never been repainted. This came out of a laboratory setting and was used in making prototype parts. This machine was in excellent condition when I received it so the only work that has been done is a full clean and replacement of the neoprene way wipers. The oiling system has been cleaned and flushed as well as the carriage fluid flushed and replaced with new. Everything functions as it should and is just smooth smooth smooth. This is a very nice machine; one of the nicest I have come across.

This is a 1986 machine and it has many late model features such as hardened and ground cross slide ways, tapered Hardinge spindle, wide bed plate with teflon lined carriage, pre-drilled DRO mounting points, ball bearing apron rack gear and more.

Machine comes with pictured tooling (misc. 5C collets, live center, Buck 3 jaw adjust-tru chuck, drill chuck, factory change gear, & drive plate). In addition I have the coolant nozzle as well as the lexan chip shield. Other accessories are available such as taper attachment, follow rest, steady rest, chucks etc.

SPECIFICATIONS:
Spindle Capacity 5C Collets – Round……………………………..1-1/16″
Spindle Capacity 5C Collets – Hex……………………………………..7/8″
Step Chucks…………………………………………………………1-1/16″ – 6″
Variable Spindle Speeds…………………………………125 – 3000 RPM
Swing Over Bed……………………………………………………………….11″
Swing Over Cross Slide………………………………………………………6″
Swing Over Carriage…………………………………………………………..9″
Distance Between Centers…………………………………………………18″
Hole thru Spindle………………………………………………………….1-1/4″
Compound Slide Travel………………………………………………………3″
Carriage Power Feed Range……………………………….5/16″ – 7 IPM
Cross Slide Power Feed Range……………………………3/16″ – 4 IPM
Tailstock Spindle Travel…………………………………………………3-3/4″
Tailstock Spindle Taper…………………………………………….No. 2 MT
Lead Screw Diameter…………………………………………1″ – 8 Thread
Range of Threads in Gear Box……………………………………11 – 108
Number of Thread Changes in Gear Box……………………………..27
Electrics………………………………………………………..230V/3Ph/60Hz

*Preliminary Specifications Subject to Verification.

All sales are “As-Is” FOB New Berlin, WI 53151 freight collect (buyer is responsible for all freight costs but we are happy to assist in making arrangements). Machine is available for inspection. Machine can be crated and shipped internationally. Payment to be made by cash, check or wire transfer

SOLD