2012 Haas ST-20 Turning Center

Up for sale is this late 2012 Haas ST-20 CNC turning center. This is a nice unit with only 4600 spindle hours. The options on the machine are spindle orientation, belt-type chip conveyor, and programable hydraulic tailstock. The standard features and specifications are listed below.

This lathe comes out of a state of the art, beautifully clean, brass foundry machine shop. Brass is what this lathe has machined its whole life. All machines in this shop are bank leased and every 7 years are traded in for new units without exception. This came off the shop floor in fully functional condition running parts until the minute it was disconnected. To purchase a new machine with these options from Haas is nearly $70,000!

This lathe has just received a full turret and wedge alignment service and is within all Haas factory specifications. The local Haas Factory Outlet has been out to inspect this machine and has noted zero issues.

This machine is powered up and available for inspection. 

Standard Features: 

• 8.3″ Hydraulic Chucking System 

• A2-6 Spindle Nose 

• 2.0″ Bar Capacity 

• 15″ Color LCD Monitor 

• Built-In USB Port 

• 1 MB Program Memory 

• Rigid Tapping 

• User-Friendly Haas Control 

• ISO Standard G-Code Programming 

Options 

• Programmable Hydraulic Tailstock 

• Belt-Type Chip Conveyor 

• Spindle Orientation

Specifications:

DATE OF MANUFACTURE                                             2012

SWING OVER FRONT APRON                                       31.8″

SWING OVER CROSS SLIDE                                          20.8″

MAX. CUTTING DIAMETER                                          15″

MAX CUTTING LENGTH                                                21″

BAR CAPACITY                                                                 2″

X AXIS TRAVEL                                                                9.3″

Z AXIS TRAVEL                                                                 21″

RAPID TRAVERSE ALL AXES                                       945 IPM

SPINDLE SPEEDS                                                              4000 RPM

SPINDLE NOSE                                                                   A2-6

SPINDLE BORE                                                                  3.5″

SPINDLE MOTOR                                                              20 HP

TURRET CAPACITY                                                         12 STATIONS

TAILSTOCK STROKE                                                       21″

TAILSTOCK TAPER                                                          MT #4

APPROX. DIMENSION                                                     165″ x 77″ x 81″

MACHINE WEIGHT                                                          9000 lbs (approx)

*SPECIFICATIONS SUBJECT TO VERIFICATION

SOLD

1997 Makino KE-55 Milling Machine

Up for sale is this 1997 Makino KE-55 CNC knee mill. This machine is in good condition and functions as it should. I have been through this machine cleaning and performing regular preventative maintenance. The oiling system has been flushed and filled, ball screws greased, belts tensioned, & machine cleaned. This unit does have the factory coolant tank and sump it is just not pictured. This is a Fanuc Professional Jn which is a 20FA controller and works great. The spindle is a 4000 RPM unit and is very smooth. This can do rigid tapping as well as helical interpolation. This mill is unique in that you can use it as a conventional machine with the hand wheels on the front or you can use the built in conversational programming in addition to loading a full CNC program. The conversational is very user friendly and handles angle milling, pockets, radius, bolt hole patterns, & more. Hardly any training is required to use it. This machine is capable of DNC (drip cnc) through the RS232 port on the control cabinet.

This mill weighs 6600 pounds and has a very stout cast iron base for maximum rigidity. All the slides are of the box way design are ground and hardened with the ways being hand scraped Turcite. Everything is automatically lubricated with a Showa oil pump. The machine is built with oversized and tensioned ball screws to prevent the effects of thermal growth. The T-slotted table is in great condition with no drill or mill marks on it.

I have all the original manuals (large stack) and even the original inspection report for this machine when it was shipped. This is a very high quality milling machine that doesn’t come up for sale often. These were very expensive when new and so they are not very common to find.

Makino KE55 Vertical CNC Knee Mill;

Fanuc ProJN Control

31.50″ x 14.75″ Table, 550 Lb. Capacity

8 HP, CAT 40 Spindle

4000 RPM Max.

Rigid Tapping

Travels:  21.625″ X, 12.625″ Y, 13.75″ Z

Feed Rate X, Y & Z:  197 IPM Max.

Rapid Travel Rate:  472 IPM X & Y, 197 IPM Z

This machine is FOB New Berlin, Wisconsin. The buyer is responsible for all freight and I will assist in any way that I can. I will palletize and ship this machine freight, please ask for a quote. Local pick up is available as well. The mill is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.

2007 Haas SL-10T CNC Lathe

Up for sale is this 2007 Haas SL-10T CNC Lathe. This is in great condition and is a one owner machine that never did production work. The paint and sheetmetal on this lathe are nearly perfect. I was told the owner passed away 5 years after purchasing and the machine sat unused since then. This is a basic machine with a 12 position turret, hydraulic 3 jaw chuck, hydraulic tailstock, auger chip conveyer and a Royal FX275 Filtermist unit. This machine will come tooled up just as you see and does include the chuck & tailstock foot pedal, chip auger, manuals, & spare inserts and tooling blocks. This lathe is wired up for 208V/230V 3 phase operation.

This machine is FOB New Berlin, Wisconsin. The buyer is responsible for all freight and I will assist in any way that I can. I will palletize and ship this machine freight, please ask for a quote. Local pick up is available as well. The mill is powered up and available to test in my shop at any time. In person Inspections are welcome. This is available for immediate sale.